Research: The Challenge of Hydrogen Storage in Air Mobility

Research: The Challenge of Hydrogen Storage in Air Mobility

The development of hydrogen storage tanks is a key aspect to ensure its efficient use in air mobility. Currently, the main limitations they present include the need for materials resistant to high pressures, safety in their handling and the optimization of storage space.

Current limitations

For the physical storage of hydrogen, a tank is needed that is capable of preventing leakage due to permeability on all surfaces. The least permeable materials are metals, but they are too heavy to design a tank for transport vehicles; Alternatively, composite reinforcements can be added, even building tanks with only them, to reduce their weight and increase their resistance to internal pressure.

Current classification of tanks for physical storage of hydrogen

Currently, tanks for the physical storage of hydrogen are classified into five categories according to the type of construction and the materials used. Of these five categories, the first four are already commercially available, while the fifth is still in the experimental and development phases:

1. Metal tanks (steel or aluminium)

  • Made entirely of steel or aluminum.
  • They provide high structural strength and good impermeability to hydrogen, but have a considerable weight, which limits their application in air mobility due to weight restrictions.
Compressed hydrogen storage: Types of hydrogen tanks. In this photo there are 4 types, but there are up to 5.
Compressed hydrogen storage: Types of hydrogen tanks.

2. Tanks with metal liner (steel or aluminium) and partial reinforcement of composite material

  • They have an internal metal core (liner) made of steel or aluminum.
  • Partially reinforced with a circular winding or “hoop wrap” made of composite materials, usually carbon fiber or glass, to increase their resistance to pressure without adding too much extra weight.

3. Tanks with metal liner (steel or aluminium) and complete composite reinforcement

  • The internal liner remains metallic (steel or aluminum) to ensure waterproofing.
  • The structure is fully reinforced with composite materials (full wrap), wrapping the entire tank in multiple directions to considerably improve mechanical strength and reduce weight compared to all-metal tanks.

4. Tanks with plastic liner and complete composite reinforcement

  • The inner liner is made of a special plastic that provides a lightweight and effective barrier against hydrogen leakage.
  • It is completely covered by composite fibers, usually carbon fiber, which withstand structural pressure. This design manages to significantly reduce the overall weight, ideal for mobile applications.

5. Linerless tanks, made entirely of composite material (All-composite)

  • Currently in the experimental phase, these tanks do not use any internal metal or plastic liner, but are entirely made of advanced composite materials.
  • The challenge of this type of tank is to ensure adequate impermeability to hydrogen without an interior liner, in addition to achieving the structural strength necessary for critical applications such as air mobility.

Filament winding: LABTEND’s bet for carbon deposits

Of all the methods of manufacturing carbon fibre tanks, LABTEND is committed to filament winding, a common practice in this field. With a 4-axis winder, a carbon fiber filament is deposited with tension around a mandrel, which rotates. The fibre can be impregnated with a resin before winding, although dry winding is also possible with this method. In addition, the head that deposits the filament also rotates and changes its speed so that the winding angle is correct.

This technique allows the creation of parts with high structural strength, low weight and specifically adapted to withstand high internal pressures, being ideal for the manufacture of gas storage tanks such as hydrogen.

In order for there to be no oversizing of the fiber coating, it is necessary that it does not slip during winding, something that is achieved by requiring that at each moment of the process it follows the geodesic of the geometry. This condition is given because the geodesic curves are tangent to the geometry, which causes the tension of the fiber to have no lateral stresses, so that slippage is avoided.

LABTEND Filament Winding - Technical diagram of the filmanet winding technique
Technical diagram of filmanet winding technique

Hydrogen technologies: driving the energy transition

Today, innovations in hydrogen technologies represent a fundamental aspect in the transition to more sustainable energy sources. Its development is key to reducing dependence on fossil fuels and minimizing environmental impact. That is why investment in research and development in this field is crucial to improve its viability and implementation in the different sectors, including mobility.


Project partners

Project Subsidized by

Scroll to Top